EasyManua.ls Logo

RealFlame PYROTECH - User Manual

RealFlame PYROTECH
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PYROTECH
®
INSTALLATION & OPERATING MANUAL
2012
The Pyrotech Space Heater range are approved to be installed into a
masonry fireplace, as a zero clearance firebox enclosed by a timber
frame and plastered or as a free standing unit. The Pyrotech Range is
approved to operate on Natural Gas and Propane (LPG) gases only.
Approval Number: GMK10092
VERSION 12

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the RealFlame PYROTECH and is the answer not in the manual?

Summary

Warranty Information

Data Plate

Pyrotech Inbuilt Model

Pyrotech Inbuilt Installation Procedure

Step-by-step guide for installing the inbuilt model.

Pyrotech Zero Clearance Model

Pyrotech Zero Clearance Timber Frame Installation

Instructions for timber frame installation of the zero clearance model.

Pyrotech Freestanding Model

Flue Requirements

Dimensions

Pyrotech Inbuilt and ZC Dimensions

Technical drawings and measurements for Inbuilt and ZC models.

Pyrotech Freestanding Dimensions

Lighting Pilot and Main Burner

Servicing and Maintenance

Parts Location (Standard Models Only)

Gas Control Assembly

Parts List (Deluxe Models Only)

Troubleshooting for Pyrotech Standard

Pyrotech Flue Termination (Cowls) Regulations

Optional Marble Hearth and;or Margin Set

Optional Mantelpiece Installation

Electrical Diagram (Standard Models Only)

Electrical Diagram (Deluxe Models Only)

RealFlame PYROTECH Specifications

General IconGeneral
BrandRealFlame
ModelPYROTECH
CategoryHeater
LanguageEnglish