Your
--
31z_AL_Ei..st7c2.. Plug'n Talk is an "instant
-
intercom system.
Just plug the two stations into AC outlets in your house or office and
you're in business! The messages are transmitted right through the
house wiring.
Another feature of Plug'n Talk is expandability. You can always add
extra pairs of stations, and each station will be able to talk to all the
others.
Plug'n Talk uses all solid state circuitry, assuring you of reliable
operation, long life and low power consumption.
FEATURES
•
Pleasant-sounding call-tone lets you alert other stations before you
start talking
•
Lock Button for "hands-free
-
long transmissions
Example: baby sitting, dictation, monitoring
•
Lighted TALK bar
•
All-silicon solid-state components for long life and |ovv power con-
sumption
SPECIFICATIONS
Power Output:
Transmitting Section:
Frequency:
RF Output Power:
Semiconductor Complement:
80 mW at 1 kHz (with 10% THD)
AM System
140 kHz
30 mW across 10 ohm load
1 Integrated Circuit
1 Silicon Transistor
1 Diode
2 Rectifiers
Power Requirements:
120 Volts, 60 Hz, AC, 5 Watts Max.
(240 Volts, 50 Hz, AC, 5 Watts Max.)
-- 2 —
To Next Page
Loading...