EasyManua.ls Logo

Realtree RT210 - Charging Base Notes; Attaching and Removing Belt Clip; Turning Radio On and Off; Setting the Volume Level

Realtree RT210
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Notes
u
The light on the charging base will glow continuously when radio/battery is inserted.
u When moving between hot and cold temperatures, do not charge the battery until the
battery temperature acclimates (usually about 20 minutes).
u For optimal battery life, remove the radio or battery from the charger within 16 hours.
Do not store the radio in the charger.
Attaching the Belt Clip
1.
Align the belt clip post with the hole in the back of the radio.
2. Gently push until the clip clicks into place.
Removing the Belt Clip
1.
Push down on the release tab at the top of the belt clip to release the catch.
2. Pull the belt clip away from the back of the radio.
Turning Your Radio On and Off
Turn clockwise to turn the radio on and counterclockwise to turn the radio off.
The radio chirps and the display briefly shows all feature icons available on your radio.
Setting the Volume
Rotate while holding down MON” until you reach a comfortable listening level.
Rotate clockwise to increase the volume or counterclockwise to decrease the
volume.
14
Getting Started
Getting Started
Realtree 10-01-04.qxd 10/1/04 12:14 PM Page 16