Reavon UBR-X110 - User Manual

Questions and Answers

K
Kevin MercadoAug 16, 2025
Why does my Reavon UBR-X110 say 'No Disc' or 'Unknown Disc'?
- C
  corey00Aug 16, 2025
  This error can occur for several reasons. First, ensure that a compatible disc is loaded in the player. Eject the disc and check that it is compatible. If the disc's recording surface is dirty, eject it and clean any dirt or fingerprints. Also, make sure the disc is properly loaded with the label side facing up and the record side facing down. If condensation has formed on the laser pick-up head, turn on the player, eject the disc, and leave the player on for about an hour.
S
Shelly CunninghamAug 18, 2025
Why does the 'Connection Test' fail on my Reavon UBR-X110 Blu-ray Player?
- B
  Bethany AdamsAug 19, 2025
  The “Connection Test” fails because there is no internet connection. Verify that your router has a connection to the internet. Try power cycling the modem and router. Try a direct Ethernet connection if possible.
M
Michael GilbertAug 21, 2025
Why is there no sound coming from my Reavon Blu-ray Player?
- G
  Gene HolmesAug 21, 2025
  There might be several reasons for the lack of sound. First, check the audio cable to ensure it's properly connected. If it is, make sure the mute function isn't activated by pressing the MUTE button. Also, verify that the volume isn't set too low by pressing the VOL+ button to increase it. If you are playing SACD or DVD-Audio, note that coaxial or optical digital audio connections are not supported due to copyright restrictions; use analog or HDMI audio output instead.
K
Kevin GrahamAug 25, 2025
What to do if my Reavon UBR-X110 has no picture?
- L
  Linda BrayAug 25, 2025
  If your Reavon Blu-ray Player isn't displaying a picture, start by checking the video cable to ensure it's properly connected. Next, make sure your TV input is correctly selected to the input where the player is connected. Additionally, if “Pure Audio” mode is engaged, press the PURE button to cancel it. Finally, ensure that the video output format selected on the player is supported by your TV; if not, select a supported output resolution.
K
kyleweissAug 28, 2025
How to fix a Reavon UBR-X110 Blu-ray Player remote control failure?
- J
  Jane StanleyAug 28, 2025
  If your Reavon Blu-ray Player's remote control isn't working, first ensure you are using it within the effective range. If the issue persists, replace the batteries.
T
Tina SchneiderAug 31, 2025
What to do if my Reavon UBR-X110 shows no color?
- A
  Andrew ReedAug 31, 2025
  If your Reavon Blu-ray Player isn't displaying any color, check the saturation setting on both your TV and the player.
J
Jonathan CampbellSep 2, 2025
Why is the color incorrect on my Reavon Blu-ray Player?
- M
  Michael ThompsonSep 3, 2025
  If the color on your Reavon Blu-ray Player is incorrect, and you're using HDMI for video output, check the color space setting on both your TV and the player.
A
Alyssa SmithSep 6, 2025
What to do if my Reavon UBR-X110 Blu-ray Player has a temporary function failure?
- C
  Caleb FreemanSep 6, 2025
  If your Reavon Blu-ray Player experiences a temporary function failure, it could be due to a scratched or damaged disc. Try replacing the disc. Some functions may not be available during playback, so stop playback completely and try again. Interference from other devices can also cause this issue. Identify interference by turning off other devices, and then relocate or replace the offending device.
S
Stephen AdamsSep 8, 2025
Why are some Setup Menu items grayed out on my Reavon UBR-X110 Blu-ray Player?
- S
  Shawn MirandaSep 8, 2025
  Some setup options cannot be changed while a disc is playing, or they may be mutually exclusive with other setup options. Fully stop playback, eject the disc, and then try the Setup Menu again.
W
wallcarlaSep 12, 2025
Why does my Reavon UBR-X110 'Network' show no server?
- M
  michelleknappSep 12, 2025
  The “Network” feature shows no server because there is no network connection, the media server is not properly configured, or the device is connected to the wrong network. Verify that other network features are functional on the device. If the network issues are isolated to the “Network” feature, consult your media server’s documentation to ensure proper configuration.

Summary

Important Information

Important Safety Instructions

Essential guidelines for safe operation and maintenance of the player.

Disc care and handling

Guidelines for maintaining discs to ensure optimal playback.

Common Connection Methods

Connecting to an A;V Receiver via HDMI

Instructions for connecting the player to an A/V receiver using HDMI.

Connecting to a TV via HDMI

Steps to connect the player directly to a TV using an HDMI cable.

Connecting to a TV and A;V Receiver via Dual HDMI

Guide for connecting the player to both TV and receiver using dual HDMI outputs.

Connecting to an A;V Receiver or Amplifier via S;PDIF (Coaxial; Optical)

Instructions for connecting via coaxial or optical digital audio outputs.

Connecting to the Internet

Basic Operations

Disc Playback

Step-by-step guide to playing discs on the player.

Fast Forward and Reverse

Pause and Frame-by-Frame

Volume Control

How to adjust the audio volume for different outputs.

Advanced Operations

Media Files Playback

Playback from a USB Flash Drive

Playing music, videos, and photos from a USB drive.

Playback from a Local Network

Streaming media files from computers or NAS devices on a network.

Playing Music Files

Playing Video Files

How to play video files from discs or USB drives.

Viewing Photo Files

Setup Menu Options

Using the Setup Menu System

Explains how to navigate and use the player's setup menu.

Display

Settings for video output options like aspect ratio and resolution.

Video parameter

Adjusts picture quality parameters like brightness, contrast, and sharpness.

Select the Best Output Resolution

Guidance on selecting the optimal video output resolution for your TV.

Audio

Settings for audio output formats and digital connections.

Speaker Setting (UBR-X200)

Configures speaker output channels and settings for surround sound.

Speaker Test Tone (UBR-X200)

Recommended Audio Format Options

Recommended audio settings for various connection types.

Audio Connection Directly to TV

Multi-Channel Digital Audio to Receiver through HDMI

Recommended audio settings for receiver connection via HDMI.

Multi-Channel Analogue Audio to Receiver (UBR-X200)

Coaxial or Optical Digital Audio to Receiver

HDMI

Settings for HDMI output modes, color space, and deep color.

HDMI Audio Out

Network

Settings for network connection, IP address, and BD-Live access.

Playback

Settings for playback preferences like angle mark, PIP, and auto playback.

Troubleshooting

Reavon UBR-X110 Specifications

General

HDR Support	HDR10, Dolby Vision
Connectivity	Wi-Fi, Ethernet
Disc Formats	Blu-ray, DVD, CD
Audio Decoding	Dolby Atmos, Dolby TrueHD, DTS:X, DTS-HD Master Audio
Outputs	HDMI, Optical
Video Output	HDMI
Audio Output	Optical, Coaxial