rebo RB201 Single Tower - User Manual

RB201 Issue-I 14/05/2021
Thank you
Visit www.rebo.co.uk
RB201 REBO Single Tower
REBO
Penrhos Farm, Penrhos, Llanymynech, SY22 6QH
www.rebo.co.uk
THIS PRODUCT IS NOT SUITABLE FOR CHILDREN UNDER 36 MONTHS. CONTAINS SMALL PARTS. CHOKING HAZARDS.
ONLY FOR DOMESTIC USE. FOR OUTDOOR USE.
PRODUCT MUST BE ASSEMBLED BY AN ADULT(S) BEFORE USE.
ADULT SUPERVISION IS REQUIRED.
CHILDREN MUST NOT USE THE EQUIPMENT UNTIL PROPERLY INSTALLED.
REMOVE ALL PACKAGING BEFORE USE.
RETAIN MANUAL FOR FUTURE REFERENCE.
Instruc ons for assembly, maintenance and safe use.
WARNING!

rebo RB201 Single Tower Specifications

General

Category	Play Sets & Playground Equipment
Product Type	Single Tower
Brand	Rebo
Model	RB201
Material	Wood
Recommended Age	3+
Weight Capacity	50 kg
Features	Climbing Wall, Slide, Ladder

Summary

Product Overview and Safety

General Safety Warnings

Product suitability, choking hazards, and general safety advice.

Usage and Assembly Precautions

Domestic/outdoor use, adult assembly, supervision, and installation requirements.

Detailed Safety and Usage Guidelines

Product Suitability and Age;Weight Limits

Specifies age range 3-10 years and maximum user weight.

Assembly, Installation, and Supervision

Emphasizes adult assembly, supervision, and proper installation.

Maintenance and Safe Play Environment

Guides on checking parts, timber, soft surfaces, and safe play practices.

Assembly Steps and Product Specifications

Attaching the Slide

Step-by-step instructions for fitting the slide component.

Deck Assembly

Details on securing the deck to the tower frame.

Safe Play Area and Dimensions

Defines the safe zone around the product and provides overall dimensions.

Parts, Tools, and Initial Assembly

Required Tools and Components

Lists all necessary tools and parts included in the RB201 kit.

Assembly Steps 9 B and 10 B

Illustrates specific assembly procedures for tower components.

Assembly Procedures and Fixing Methods

Assembly Steps 7 B and 8 B

Shows attachment of W1 and the ladder RB219.

Fixing Procedures and Symbols

Explains pre-drilling, screw fixing, tightening, and bolting together.

Base Structure Assembly Steps

Assembly Step 1

Illustrates the initial assembly of the tower base structure.

Assembly Step 2

Continues base assembly by attaching crossbeams.

Tower Framework and Platform Assembly

Assembly Steps 7 A and 8 A

Attaching main frame parts (W1) and ladder (RB219).

Assembly Steps 3 and 4

Building vertical supports and attaching base planks.

Platform Finishing and Configuration

Assembly Steps 5 and 6

Fixing platform planks (W5) and vertical supports (W3).

Standard Configuration and Roof Option

Details the standard build and the option to add a roof.