3. 처음 사용 전
RECARO Zero.1은 정면을 바라보는 위치로 장착됩
니다. 체중이 9kg인 유아까지는 시트 쉘을 후면으로
장착해야 합니다.
잘못된 시트 위치로 카시트를 사용하는 것을 방지하
기 위해 실수로 정면을 바라보도록 배치했을 때 저항
하는 기능을 갖추고 있습니다.
이 기능을 활성화하려면 시트 쉘을 액세스 위치(6장
참조)에 장착하고 후방보기 위치를 유지해야 합니
다. 이제 경고 기능이 활성화됩니다.
3. Before first use
The RECARO Zero.1 comes in the forward-facing
position. For babies up to 9 kg the seat shell must
be used in rear-facing direction.
To prevent the accidental incorrect use in the
wrong seat position, the RECARO Zero.1 is
equipped with a function that resists if the seat is
turned in the forward-facing position by mistake.
To activate this function you must turn the seat
shell into access position (see chapter 6) and then
keep on turning into the rear-facing position. The
warning function is now activated.
10 KR EN