10. 덮개 설치(일부 제품만 해당)
RECARO Zero.1에서 어깨 지지대의 표시 부분에서
양쪽 덮개에 고정핀을 삽입합니다.
10. Installation of the canopy (not included
in all versions)
Insert the locating pin of the canopy on both sides
at the marked spots into the shoulder support of
the RECARO Zero.1.
이제 시트 쉘에서 커버를 감쌉니다.
Now tuck the cover under the shell of the seat.
덮개 앞쪽 끝을 당겨 열거나 닫을 수 있습니다.
덮개 앞쪽 끝에는 추가로 접는 부분이 있습니다.
It can be opened and closed by pulling on the front
end of the canopy.
An additional fold down element is attached to the
front end of the canopy.
30
KR
EN