5
How To Switch Between Modes (Bluetooth OFF)
1. From the default time screen, press the Bottom Left button once (Date display)
2. Now press Bottom Left button again (Daily Steps/Pedometer display)
3. Now press Bottom Left button again (Calories burned display)
4. Now press Bottom Left button again (Distance traveled/Kilometers traveled display)
5. Now press Bottom Left button again (Alarm display)
6. Now press Bottom Left button again (Stopwatch display)
_________________________________________________________________________________________
How To Turn On The Blacklight
1. To turn on the backlight press the Top Left button once. It will illuminate the watch face
for around 2 seconds.
_________________________________________________________________________________________
How To Check Your Total Steps
1. To turn on the backlight press the Bottom Left button twice. Steps for the day will
display. Pedometer is reset every night at midnight to zero and is on by default non-
stop. The first 10 steps are not counted to allow for slight deviation.
_______________________________________________________________________________________
MISCELLANEOUS:
1. When the battery gets low, the low battery icon will flash to remind you to change the
battery. Your local jeweler can change this battery for around $10.
2. In any mode, the watch will return to the default time display within 10 seconds if you
don’t touch any buttons.
To Next Page
Loading...
General