To Next PageTo Next Page
Need help?Do you have a question about the Record Power CamVac Series and is the answer not in the manual?
General| Brand | Record Power |
|---|---|
| Model | CamVac Series |
| Category | Industrial Equipment |
| Language | English |
Explains symbols requiring user action before operating the machine.
Details symbols indicating potential risks of injury or damage.
Ensuring proper PPE, appropriate attire, and safe work practices for user protection.
Maintaining machine stability, keeping the work area clear, and considering environmental conditions for safe operation.
Guidelines for safe electrical supply, connections, and preventing electric shock hazards.
Procedures for maintaining the machine, ensuring guards are in place, and using approved accessories.
Operational advice specific to high filtration dust extractors, including positioning and hose management.
Steps for preparing the machine for use, including filter checks and transit strap removal.
Information on preventing fires and managing risks associated with wood dust and hazardous materials.
Guidance on routine maintenance, filter cleaning, and replacement procedures.
References to relevant health and safety regulations for dust extraction.
Details the conditions, exclusions, and duration of the product guarantee.
Steps to follow when making a claim under the manufacturer's guarantee.
Defines the extent of the manufacturer's liability, particularly for commercial use.
Information regarding guarantee applicability and regional differences.
Instructions for disassembling and reassembling the extractor head and motor.
Procedure for attaching the dust extractor to a wall using a mounting bracket.
Connecting different diameter hoses and using acoustic outlets for noise reduction.
Guidelines for operating the dust extractor, including starting, motor limits, and wet waste.
Steps to take in case of a hose blockage or an unexpected power failure.
Procedures for emptying the extractor and maintaining cloth and paper filters.
Instructions for accessing and replacing worn motor carbon brushes.
Details the wiring connections for single-phase 230V power supply.
Details the wiring connections for three-phase 400V power supply.
