To Next PageTo Next Page
Need help?Do you have a question about the record-USA 5100 Series and is the answer not in the manual?
General| Brand | record-USA |
|---|---|
| Model | 5100 Series |
| Category | Door |
| Language | English |
Inspect door operation daily using safety checklist and at door. Safety devices should be in place and operational.
Have door adjusted as described in Owner's Manual. Have door inspected at least annually by an AAADM certified inspector.
Familiarize user with door system and emphasize owner responsibility for daily safety checks.
Call AAADM Certified technician if door fails to operate or for any repairs.
Automatic door products are distributed nationwide via authorized suppliers for sales, installation, and service.
Ensure door system maintenance complies with industry standards and AAADM certification requirements.
Proper decals and labels must be maintained; doors need annual checks by AAADM certified inspectors.
Supplier must provide instructions for daily checks, switch usage, power disconnect, service contacts, inspection forms, and warranty.
Discontinue operation immediately if unsure about safe performance and secure the door.
Automatic sliding doors come in various combinations like single, bi-parting, and emergency breakout types.
Test electronic sensors by walking towards the door at moderate speed to ensure smooth opening and closing without impact.
Step on activating floor mats to ensure smooth opening and closing without impact.
Check mat operation when stepping through and ensure smooth closing after leaving the mat.
Ensure all required safety signage and decals are properly displayed on and near the door.
Verify door closing speed and force do not exceed specified limits for safe operation.
Test manual activating switches and emergency breakout features for proper function and re-latching.
Keep floor guides clean and manage traffic flow for safe and straight approaches to the door.
Select operating modes (OFF, AUTO, EXIT, OPEN) and understand control panel display feedback for door status.
Interpret indicators for 'Emergency Breakout', 'Safety Beam', and 'Obstruction' for immediate action.
Learn to lock the control panel for security and perform operator resets when necessary.
Details the two-year warranty on manufactured parts, excluding improper installation, misuse, or unauthorized service.
Excludes liability for incidental damages and disclaims implied warranties of merchantability or fitness.
Provides contact details, address, and website for record-USA door systems.
