EasyManua.ls Logo

RectorSeal EZ Trap EZT 113 - User Manual

RectorSeal EZ Trap EZT 113
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
0 2 1 4 4 9 8 3 1 1 3 0
(EZT113)
Model No.
83113
(EZT 113)
U.S. Patent Numbers 5,069,042 5,522,229
Kit Contents
3/4″ Standard Trap (1)
3/4″ Cross (1)
3/4″ Tee (1)
Red Caps (3)
Yellow Cleaning Label (1)
3/4” Standard
Condensate Trap.
No Brush
1” DROP
RectorSeal® 2601 Spenwick Drive - Houston, TX 77055
ph: 713.263.8001 - 800.231.3345 fax: 713.263.7577 - 800.441.0051
www.rectorseal.com - Like Us on Facebook
Scan for more info
961675
®
3 YEAR WARRANTY. The manufacturer disclaims all implied and express warranties, including the implied warranty of merchantability
and the implied warranty of tness for a particular purpose, except as follows: The EZ-Trap condensate trap or overow switch purchased by you is
unconditionally warranteed to be free from defects in material and workmanship under normal use for a period of three (3) years from date of
purchase, providing it is installed and operated strictly in accordance with manufacturer’s installation instructions. If the product is found to be
defective or otherwise fails in normal use, you may return it for replacement. All freight charges for the return of the product shall be borne by you.
The manufacturer will pay outgoing freight charges for the replacement product. Defective products returned to the factory prepaid will be repaired
or replaced free of charge. Replacement product will, to the extent such product is then available in manufacturer’s inventory, be of similar type,
color and kind. Manufacturer retains the right to substitute product if replacement product does not conform in terms of color, type and specica-
tions to the original product, if no longer available. This warranty does not cover replacement labor or any cost, claim or incident to any defect nor
does it cover freezing or any other consequential damages. The sole liability of the manufacturer under this warranty is limited to the replacement
of defective product. Product damaged by improper use, accident, neglect, alteration, abuse or improper installation is excluded from this warranty.
Question and Answer IconNeed help?

Do you have a question about the RectorSeal EZ Trap EZT 113 and is the answer not in the manual?

Summary

Product Details

Kit Contents

Lists the components included in the 83113 condensate trap kit, such as traps, tees, caps, and labels.

Warranty Information

Details the manufacturer's 3-year warranty terms, coverage, limitations, and return procedures for the condensate trap.

Installation Instructions

Trap Assembly Process

Step-by-step instructions for assembling the EZ-Trap condensate trap, including fitting components and connecting the drain line.

Installation Best Practices

Key considerations for installing the condensate trap, emphasizing adherence to instructions, codes, and proper drainage angles.

RectorSeal EZ Trap EZT 113 Specifications

General IconGeneral
MaterialPlastic
Model NumberEZT 113
Size/Diameter1-1/2 inch
Inlet Size1-1/2 inch
Outlet Size1-1/2 inch
ColorWhite
Product TypeTrap
ApplicationDrainage
FeaturesEasy to install
Height6.5 in.

Related product manuals