DESCRIPTION:
Mighty Pump™ gives contractors an easy way to remove blockages from A/C condensate drain lines, without the need for
electricity, nitrogen tanks or expensive gas cartridges. Made of heavy-duty molded PVC, this lightweight, re-useable pump
generates enough pressure to quickly clean slime, mold and dirt plugs from primary and secondary condensate drain lines. It’s a
reversible, hand-operated pump that can be used to vacuum or push-out a clogged drain line.
CHARACTERISTICS:
• Quickly & completely clears slime blockage in seconds
• Clears blocked A/C condensate drain lines without nitrogen
• Clean out A/C condensate drain lines
• Can be used to drain standing water from A/C condensate & overflow pans
• Can be used to remove standing water from water heater overflow pans
APPLICATIONS:
Any type of Air Conditioning condensate drain line.
PACKAGING:
Code Size Qty./Case Lbs./Case Cu. Ft./Case
97795 1 pump 4 19.5x20.375x17.5 4.02
97796 2 hoses per bag 6 16.5x15x10.75 1.54
INSTRUCTIONS
READ ALL DIRECTIONS AND WARNINGS ON LABEL BEFORE USING
The pumps primary use is for clearing condensate drain lines, but it is also useful for moving water in other applications
such as:
• Draining a condensate overflow pan
• Draining a water heater overflow pan
• Draining a tub
1. To vacuum a condensate drain line
Connect the vacuum end of the Mighty Pump™, using the enclosed coupling, to the discharge end of the condensate
drain line or item needing draining. Note the direction of the FLOW arrow on the bottom of the pump body. Place
the discharge hose end in a bucket or drain for collection and disposal of the waste water.
Figure 2: Pump arrangement using the vacuum side.
To Next Page
Need help?
General
