To Next PageTo Next PageWhat to do if my RED FUEL Remote Starter won't jump start my car?
If your RED FUEL Remote Starter turns on but fails to jump start your vehicle, first check all connections to ensure they are secure. Then, verify that the jump starter's charge level is at least 40%. Avoid attempting to jump start the vehicle more than three consecutive times. If the vehicle still doesn't start, it's recommended to consult a qualified service technician.
How to fix a RED FUEL SL161 Remote Starter when the display won't turn on?
If the display of your RED FUEL Remote Starter doesn't turn on, ensure that the unit is charged by connecting it to a power source to reset it. Also, verify that the ON/OFF switch is in the ON position.
Why does my RED FUEL SL161 Remote Starter beep when connected to the battery?
If the RED LED is solid red and the green LED is off, with beeping once per second when the cable is connected only to the battery, it indicates that the vehicle battery voltage is lower than 10.5V. To resolve this, connect to the jump starter and turn the key to jump start the vehicle.
What does it mean when the thermometer symbol is flashing on my RED FUEL SL161?
If the thermometer symbol is flashing on your RED FUEL Remote Starter, it means the unit is either too hot or too cold. The thermometer symbol should disappear once the temperature condition is resolved.
General| Brand | RED FUEL |
|---|---|
| Model | SL161 |
| Category | Remote Starter |
| Language | English |
Instructions on how to check the internal battery charge level using the LCD display.
Procedure for charging the jump starter's internal battery using a USB charger or port.
Step-by-step guide for using the jump starter to start a vehicle engine.
Guide on how to use the unit's USB ports to charge mobile devices.
Instructions for operating the built-in LED light and its different modes.
Common problems and solutions related to the jump starter's operation.
Explanation of LED indicators and alarm sounds for smart cable status.
