EasyManua.ls Logo

Red Jacket Quick-Set AGUMP33R1 - Page 55

Default Icon
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C-1
The City of New York Fire Department Conditions of Approval
Certificate of Approval #4939
1. Motor wiring shall be in accordance with the New York City Electrical code for hazardous locations.
2. The installation and use of pumps shall comply with applicable New York City Code, rules and regulations
including 3RCNY § 21-20 and/or 3RCNY § 21-21. Manufacturer’s and Underwriters Laboratories Inc.’s safety
requirements and limitations shall be complied with.
3. Pumps shall be Underwriters Laboratories Inc. listed and pump manufacturer shall retain follow up service
requirements of Underwriters Laboratories Inc.
4. Equipment shall have secured and shall maintain all required approvals and shall meet all applicable Federal and
State requirements. The use of this product shall be limited to the indicated intent and has not been acceptable
for other uses or applications.
5. Certificate of Approval number shall be plainly and permanently stamped or otherwise fixed upon each pump by
the manufacturer. NOTE: Product must already be identified
with Certificate of Approval number before it arrives
at New York City job site.
6. The Certificate of Approval is issued upon condition that the material or equipment’s technology does not violate
any patent, trade name, trade secret or other intellectual right.
7. The Fire Department Certificate of Approval does not constitute an endorsement or recommendation of your
product by the Fire Department, but is a certification that your product, as represented, meets the standards as
of the date of issuance.
8. The Fire Department’s conditions of approval shall be enumerated in the installation manuals and brochures that
will be provided to New York City buyers, users and installers.
9. The Fire Department reserves the right to withdraw this approval at any time in the event there is a reasonable
doubt that the product does not operate or perform as required by code, the conditions of this resolution or as
represented in your application.
10. As the manufacturer of this equipment/material, you should be aware that any end user who fails to comply with
the condition as outlined in the approval will be subject to enforcement action which may include fines and
imprisonment.
Pursuant to §15-220.1 of the New York City Administrative Code, any person who shall knowingly make a false
statement or who shall knowingly falsify or allow to be falsified any Certificate of Approval application shall be
punished by a fine of not less than one thousand dollars ($1,000.00) and not more than five thousand dollars
($5,000.00) or by imprisonment not to exceed six months, or both, for each such offense.

Related product manuals