Red Sea Hydra 26™ HD LED
4
Day / Night Programing
Before setting up your 24 hour program refer to the general programming
guidelines given in the MAX
®
instruction manual.
1. Set the Date, Time and Time zone.
2. Select the “Easy Setup” option to program the basic daily cycle. Use
the right slider button to set the desired maximum “Day” intensity
for each color channel. Set the “Nite” intensity for each color channel
to by sliding the left slider button to the left.
Set the maximum intensity suitable for your tank and then use the
acclimation option as described below to gradually acclimate your
corals to the LED lighting.
3. Set the “Lunar” option to “OFF”. If you wish to have moonlight at
night manually add the desired light to the program graph.
Manual Auto
8:00PM4:00PM12:00PM8:00AM
EASY SETUP
Cancel
To Next Page
Loading...
Need help?
General
