5
ENG
2 Location
The first step in setting up the REEFER
™
is to choose a suitable location.
Weight
The flooring directly below the system must be rated to support the
following weight:
Approximate total weight of system including water
Model Nano 170 250 350 450
Weight 180kg /
400lb
270kg /
595lb
375kg /
830lb
530kg /
1170lb
680kg /
1500lb
Model XL 425 XL 525 XXL 625 XXL 750 P 500 P 650
Weight 670kg /
1480lb
830kg /
1840lb
930kg /
2060lb
1110kg /
2460lb
760kg /
1680lb
940kg /
2080lb
Room temperature
Site selection is important for correct temperature maintenance.
We recommended that you keep the ambient room temperature a
comfortable and stable 22°C / 72°F. Avoid placing the tank in front of
an air conditioner, heating vents or direct sunlight. A well ventilated
room with moderate light is the best place to position the aquarium.
Accessibility
Ensure that there is at least 10cm / 4” of clearance behind the
REEFER
™
to allow easy access for installing/removing cables from the
sump as well as sufficient air circulation for a chiller (larger models
only). It is recommended to leave approximately 60cm/24” between
one of the sides of the aquarium and any adjacent walls or furniture
for access to the rear of the tank.
General considerations
Ensure that the area surrounding the aquarium is waterproof and
consider moving away anything that water might damage or may be
corroded by the salt.
NOTE: The REEEFER
™
system should not be moved when full of water.
To Next Page
Loading...
Need help?
General
