Need help?Do you have a question about the Red Sea ReefMat 500 and is the answer not in the manual?
Recommended for ease of maintenance, hang the ReefMat on the front wall of the sump.
Attach the 4 legs to the bottom of the filter chamber for freestanding setup.
Cut the kink-resistant corrugated inlet hose to length and seal the connector.
Automatic fleece-mat advancement triggered by water level sensor.
Troubleshooting for when the fleece-mat cannot advance due to blockage or tear.
Notification when the fleece-mat roll is depleted and needs replacement.
Recommended for ease of maintenance, hang the ReefMat on the front wall of the sump.
Attach the 4 legs to the bottom of the filter chamber for freestanding setup.
Cut the kink-resistant corrugated inlet hose to length and seal the connector.
Automatic fleece-mat advancement triggered by water level sensor.
Troubleshooting for when the fleece-mat cannot advance due to blockage or tear.
Notification when the fleece-mat roll is depleted and needs replacement.
General| Brand | Red Sea |
|---|---|
| Model | ReefMat 500 |
| Category | Water Filtration Systems |
| Language | English |
To Next Page
