Need help?Do you have a question about the Red Sea ReefWave 25 and is the answer not in the manual?
General| Brand | Red Sea |
|---|---|
| Model | ReefWave 25 |
| Category | Water Pump |
| Language | English |
Read and follow all safety instructions for safe operation and to avoid injury.
Warning about strong magnetic fields from ReefWave pumps and recommended distance for persons with implants.
Provides a constant flow of water at a set intensity in forward or reverse direction.
Pump pulses at a uniform rate between max intensity and a default minimum 10% intensity.
Pump pulses with intensity changing in steps from minimum 20% to maximum intensity.
Pump pulses at a randomly varying rate and changing intensity up to the maximum.
Pump alternates between forward and reverse directions every 5 minutes.
Implements the last known 24-hour wave schedule programmed by ReefBeat, even when not connected.
Pump stops for 30 minutes and automatically resumes the selected wave.
Stops and starts the pump on demand for maintenance or feeding.
User-defined 24-hour schedule with up to 10 time slots for different wave types.
Save multiple customized versions of wave types for implementation in the daily schedule.
Group up to 3 pumps together to run a common schedule.
Pump provides constant flow at a user-set intensity in forward or reverse.
Pulses at a user-definable rate between max intensity and 10% minimum.
Pulses with intensity increasing in user-definable steps from 20% to max intensity.
Pump provides constant flow at the maximum intensity in forward or reverse.
Pulses at a user-definable rate to create a standing wave pattern on the water surface.
Test wave settings before saving and including them in the schedule.
Stop and start a specific pump on demand for individual pump maintenance.
Stops selected ReefBeat devices for a user-defined period, then resumes schedule.
Stops selected ReefBeat devices until maintenance mode is disabled.
Stops selected ReefBeat devices until emergency shut-down is disabled.
Alerts sent to SMD when internet connection to ReefWave is lost.
Details how to mount pumps horizontally or vertically and orient impellor cages.
Advises on cable placement, water level, and access for maintenance.
Explains the strong magnetic pairing and safety precautions.
Instructions for connecting the AC and DC power supply and checking indicator LEDs.
Guidance on locating and mounting the controller, noting its environment suitability.
Explains the Power Indicator, Wi-Fi Status LED, and buttons.
How to toggle between controller waves and ReefBeat mode.
Details how to use the Pause/Play button for feed mode and stopping the pump.
How to adjust flow intensity using the dial for different wave types.
Operating the ReefWave directly from the controller in "Controller Mode".
Guidance on connecting ReefWave to ReefBeat, including recommendations.
Instructions on how to get and install the ReefBeat mobile application.
Steps to connect the ReefWave unit to the ReefBeat app.
Process of selecting and connecting the ReefWave to the user's Wi-Fi network.
Setting names and initial wave types for the ReefWave.
How to add more ReefWave units and group them.
Explains the homepage for viewing device status and accessing functions.
Explains the dashboard for viewing/editing settings and accessing functions.
Details how to view and adjust parameters for the current wave.
Overview of custom settings available for each wave type.
Explains Forward Intensity, Reverse Intensity, Pulse time, Alternate Times, Sync/Anti-sync, Steps.
How to create, edit, and use custom waves in the Wave Library.
Setting up a 24-hour schedule with up to 10 time slots for different wave types.
Configuring the Feed Mode shortcut for temporary pump shutdown.
How the pump runs automatically with a 24-hour schedule in ReefBeat mode.
Accessing and using the Device Manager to view and manage connected devices.
Explains how to group or ungroup ReefWave units and their status.
How to check for and install new firmware versions for the ReefWave.
Setting a ReefWave to "Out-of-service" for temporary removal or maintenance.
Steps to permanently remove a ReefWave from the ReefBeat app.
How to reset the ReefWave to its factory default settings.
How to switch individual units or device types On/Off without disconnecting.
How ReefBeat sends notifications for connection loss or forgotten shortcuts.
How changing aquarium connectivity affects ReefWave and ReefBeat app.
Monthly cleaning of impellers and cages to remove organic buildup.
Half-yearly maintenance of the motor and shaft to ensure flow.
Wiping controller surfaces and replacing the backup battery.
Resolving issues with ReefBeat app installation, crashing, or malfunction.
Diagnosing why a new pump is not working or responding as expected.
Troubleshooting issues connecting ReefWave to the home network or maintaining connection.
Diagnosing problems with controller LEDs, intensity indicators, or response.
Addressing issues like air intake, low flow, buzzing noise, or reduced flow rate.
Details the 24-month manufacturer's warranty, coverage, and exclusions.
Guidance on proper disposal of the product according to EU regulations.
States compliance with FCC rules and user cautions.
Declaration of compliance with RF exposure requirements and standards.
To Next Page
