RED DSMC2 User Manual

RED® DSMC2 Camera Control
"#,*6.;*,87=;852<*?*25*+5.*<*52,.7<.87,869*=2+5.*6.;*87=;856872=8;<*7-2<
,869*=2+5.@2=1,*6.;*<=1*=1*?.*#;*27<9.,2E,87=;855.;*7-%#*-*9=.;2/
*9952,*+5.6><=+.9>;,1*<.-*<@.55=8*558@=1.6872=8;=8,866>72,*=.@2=1=1.,*6.;*$1.
52,.7<.*7-,*+5.*;.*?*25*+5.+>7-5.--2;.,=5B/;86#6*558;*>=18;2C.-;.<.55.;<
=2<87.52,.7<.9.;6872=8;/8;,87=;852=2<78==;*7</.;*+5. '8>@2557..-+8=1=1.<8/=@*;.*7-
,87=;85,*+5.=8><.=12</.*=>;.@2=1B8>;,869*=2+5.,*6.;*
Activating Your License
'8>;52,.7<.42=,86.<@2=1*,*;-=1*=1*<B8>;*,=2?*=287,8-.*<*<9.,2*5527427*!",8-.#,*7=12<
5274@2=1B8>;<6*;=9187.8;.7=.;2=87*,869>=.;=808=8=1.*,=2?*=287@.+9*0. 
/B8>9>;,1*<.=1.<8/=@*;.875B87527.B8>@255+..6*25.-=12<,=2?*=287,8-.
7B8>;6872=8;08=8#.==270<*7-<,;855-8@7=8#B<=.62,.7<.<$*9=1.+>==87=8*--*7.@
52,.7<.
'8>;6872=8;@255-2<95*B*=84.77=.;=12<=84.787=1.*,=2?*=287@.+9*0.$1.@.+9*0.@255=1.7
-2<95*BB8>;*,=2?*=2874.B*7-*55B8>7..-=8-82<=8.7=.;2=87=1.6872=8;7,..7=.;.-B8>;
6872=8;@255*--**6.;*87=;859*0.@1.;.B8>,*7,87=;85B8>;,*6.;*
7,.*2,.7<.2<*,=2?*=.-2=,*778=+.27*,=2?*=.-8;=;*7</.;;.-=8*-2//.;.7=6872=8;
Connecting Your Camera
877.,=B8>;%#,*+5.=8=1.98;=87=1.+*,48/B8>;27.+.58@=1.+*==.;B95*=.$201=.7=1.
58,4270,877.,=8;27=8=1.*-3*,.7=<,;.@/8;<.,>;2=B877.,==1.8=1.;.7-8/=1.,*+5.=8B8>;
,*6.;*

'8>@2557..-=8.7*+5.<.;2*5,866>72,*=28787B8>;,*6.;*9;28;=8,877.,=270=1.6872=8;
and after any ,rmware updates on your camera$;B.7>#.==270<#.=>9
866>72,*=287#.;2*5*7-,188<.".-866*7- ;8=8,85
7,.*5591B<2,*5,877.,=287<*;.6*-.08=8B8>;6872=8;<,*6.;*,87=;859*0./B8>1*?.68;.
=1*787.,*6.;*,87=;8552,.7<.,188<.=1.".-52,.7<.=1.7,52,4=1.877.,=+>==87
#6*55%<.;*7>*5
Page 1"D#*6.;*87=;85

RED DSMC2 Specifications

General

Brand	RED
Model	DSMC2
Category	Control Unit
Language	English

Summary

Activating Your License

Connecting Your Camera

Enable Serial Communication

Ensure serial communication is enabled on the camera via Menu > Settings > Setup > Communication > Serial.

Features Overview

Troubleshooting Camera Control

Cable Connection Errors

Check all connection points (monitor, adapter, cable, camera) and re-plug USB adapter for connection errors.

Custom Extension Cable Verification

Use a voltmeter to check custom 4-pin Lemo extension cables for proper 1:1 pin configuration.

Micro USB Port Diagnostics

Test the Micro USB port by connecting an SD card reader and checking monitor recognition of the SD card.

Post-Firmware Update Connectivity

Re-enable Red Command Protocol in camera settings if connection fails after a firmware update.

Camera Power Interruption Recovery

Allow camera 5 minutes to boot and self-test after a power loss before attempting reconnection.

SDI Overlay for RED Menu