To Next PageTo Next Page
Need help?Do you have a question about the Redback 106065 and is the answer not in the manual?
Defines the proper and unauthorized uses of the line trimmer, highlighting potential injury risks.
Details essential safety gear including eye, ear, hand, and foot protection for safe operation.
Outlines critical safety rules for operating the line trimmer, including environmental and user conditions.
Provides guidelines for safe charging, usage, and handling of the battery pack to prevent hazards.
Explains the importance of safety labels and how to obtain replacements for damaged or missing decals.
Step-by-step instructions for attaching the essential trimmer guard for operator protection and damage prevention.
Guide on how to correctly install the running wheel onto the motor housing for stability.
Instructions for attaching the plant guard to protect surrounding vegetation during operation.
Details on how to connect and adjust the shoulder strap for comfortable and balanced carrying.
Instructions on adjusting the trimmer shaft length to suit the user's height for ergonomic operation.
Guide to adjusting the handlebar position for optimal user comfort and control.
Explains how to adjust the cutting head angle for reaching difficult areas and maintaining ground parallel alignment.
Steps for charging, inserting, and removing the battery pack from the line trimmer safely.
Describes the technique for cutting grass parallel to the ground using a semi-circular motion.
Explains the function for precise trimming along lawn edges.
Details on how to adjust the trimmer's operational angle by manipulating the shaft coupling.
Instructions for safely powering the line trimmer on and off using the interlock and switch controls.
Explains how to extend the cutting line by tapping the trimmer head on the ground during operation.
Provides practical advice and techniques for effective and safe line trimming, including cutting strategies.
Step-by-step guide on how to replace the cutting head assembly on the trimmer.
Detailed instructions for removing the old line spool and installing a new one, including cleaning.
Instructions for properly winding new cutting line onto the spool, noting line diameter and length.
Guidelines on how to clean the trimmer housing and components using dry methods.
Recommendations for storing the trimmer and battery in a suitable environment to maintain performance.
Advice on rendering tools unusable and recycling components responsibly.
Information on how to obtain warranty service and contact customer support for repairs.
Power| rated voltage | 40 Volts DC |
|---|---|
| run time | Up to 25 minutes (with 2.0Ah battery) |
Performance| speed | 7500 rpm (no load) |
|---|---|
| cutting diameter | 12 inches diameter |
| cutting line diameter | 0.039 Inches (1.6mm) |
Battery and Charger| battery capacity | 2.0Ah |
|---|---|
| battery charger | 2A Charger |
| warranty on battery | 1-Year |
Weight and Dimensions| weight | 6.9 Lbs. (w/o battery) |
|---|
