To Next Page
A
agonzalezAug 11, 2025
What to do if Redexim Verti-Top 1200 has too little cleaning?
- AAshley DouglasAug 11, 2025
If your Redexim Industrial Equipment isn't cleaning enough, consider these possible solutions: * Adjust the machine to a greater depth if the working depth is too shallow. * Lower the driving speed if it's too high. * Replace the sieve with one that has a smaller mesh if the current one is too large. * Replace the brush if it's worn out. * Increase the PTO speed, up to a maximum of 540 rpm, if it's too low. * Remove any blockage if the outlet opening of the brush is blocked. * Tighten the V-belts if they are slipping.
General