EasyManua.ls Logo

RedGrey SARG1 - General Information and Safety; Supply Module Overview

RedGrey SARG1
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ver. 5/2023
RedGrey ul. Główna 13, 47- 450 Krzyżanowice
tel. +48 32 414 75 44/ e-mail: biuro@redgrey.pl / www.redgrey.pl
2
General information and safety:
The SARG1 anti-freeze system is used to reduce the possibility of freezing of the monoblock heat
pump system. Correct installation and operation are prerequisites for correct operation of the unit.
The set may only be installed by a qulified person.
Before carrying out any work on the power supply (connecting cables, installing the appliance, etc.), ensure that the
appliance is not connected to the power supply.
The appliance is not intended to be operated by children.
The appliance must not be used for purposes other than it has been dedicated to.
Lightning strikes can damage the controller and the power supply unit, therefore, during a thunderstorm it must be
disconnected from the power supply by removing the plug from the socket.
Due to the nature of the device and the safety of its use, the technical condition of the unit should be checked
regularly.
It is forbidden to operate the device in case of damage to its housing or damage to the battery or any of its
components.
Supply modul: