Redline RDL-3000 - Configuration Instructions Manual

POWERFUL. VERSATILE. RELIABLE.
1
CONFIGURING RDL3000 TO COMMUNICATE WITH FCC TVWS DATABASE
TV WHITE SPACES
Before You Start:
●
You will need permanent TVWS option keys (Region 12/44) and tokens for each radio. The keys and tokens
are provided by the distributor you purchased the Redline equipment through.
●
Keys and tokens are tied to the radio’s S/N or MAC address.
●
You will need to install the latest software. The software is provided by the distributor you purchased the
Redline equipment through.
●
To install radio software, you will need an FTP/TFTP server running on your computer. TFTP works fine for
local connections; however, FTP works better over live networks.
●
To run command lines on RDL-3000 TVWS radios you will need Telnet running on your computer, PuTTY or
Microsoft or equivalent.
●
Ensure the following TCP ports, 443 and 53 are open in your network for RDL-3000 TVWS radios to
communicate with the TVWS database.
●
The default DNS the RDL-3000 TVWS radios are using is 8.8.8.8 and 8.8.4.4.
●
IP plan needs to be determined for the base station (Ellipse) and subscriber radios (Enterprise RF) to
access the TVWS database.
●
Default Gateway needs to be configured on base station (Ellipse) and subscriber radios (Enterprise RF).