Need help?Do you have a question about the Redline RDL-3000 and is the answer not in the manual?
Details system service and safety precautions, including warnings and symbols.
Information regarding FCC and IC regulations for deployment in USA and Canada.
Overview of the RDL-3000 system, its capabilities, and components.
Details about the RJ-45 Ethernet port for data and power connectivity.
Overview of web browser and Telnet interfaces for system management.
Describes PMP mode configuration and VLAN/pass-through group features.
Configuration and operation of the RDL-3000 in PMP mode.
Configuration and operation of the RDL-3000 in PTP mode.
Steps to connect to the RDL-3000 using a web browser.
Overview of the main menus for Sector Controller and Subscriber configurations.
Summary of operational information displayed on the dashboard.
Details on accessing and interpreting system status information screens.
Accessing and adjusting various configuration settings for the system.
Describes monitoring and configuring Links, Service Groups, and Services.
Accessing utility functions like Spectrum Sweep and Users Management.
Steps to establish a Telnet session for CLI access to the RDL-3000.
Detailed descriptions of CLI commands for system management.
Troubleshooting steps for web interface connection problems.
Procedure to recover access to the unit via a long reset operation.
Introduction to the RDL-3000's security features and capabilities.
Enabling and configuring wireless authentication using X.509 certificates.
Configuring SSH for secure command line interface access.
Enabling and configuring HTTPS/SSL for secure web access.
Detailed technical specifications of the RDL-3000 system.
Packet classification rules for Sector Controller and Subscriber.
List of FCC & IC certified antennas and their specifications.
To Next Page
General