Redline RDL-3000 - Table 9: CLI - Command Summary

RDL-3000 User Manual
70-00158-01-DRAFT Proprietary Redline Communications © 2010 Page 96 of 142 November 25, 2010
Table 9: CLI - Command Summary
Command
Description
apply
Activate changes without overwriting saved configuration.
arp
Add static ARP definitions to the RDL-3000 ARP table.
chgver
Change default version of firmware and reboot.
clear
Clear commands.
del
Delete an ID.
enable
Enable an ID.
freq
Enter frequency ranges for autoscan and DFS.
generate
Create DSA key for SSH locally on RDL-3000.
get
Display the value of a statistic or parameter.
load
Load commands.
logout
End the current Telnet session.
new
Create a new ID.
ping
Send a ping message from the RDL-3000 system.
reboot
Reboot the RDL-3000.
reset
Reset the RDL-3000 statistics values.
save
Save the selected configuration settings.
script
Generate a configuration script.
set
View/modify a system parameter value.
show
View system compound objects (e.g., configuration).
snmpcommunity
View/modify the SNMP community settings.
snmptrap
View/modify the SNMP trap settings.
upgrade
Upload a firmware binary image to the RDL-3000.
user
View/modify the user/password configuration.
whoami
Display login name for this Telnet session.
Table 10: CLI - Root Mode Commands
Command
Description
Tab
When entering a command, hit the Tab key at any time to perform auto-
complete or view available options.
?
Use the '?' character to display help for any command or mode.
Example: From the root directory, enter the following command to list all
parameters that can be changed using the 'set' command:
set ?
CTRL-Z
Return to root mode.
Cancel command entry (alternative to backspace delete).
exit
Return to parent node / mode.
all (exit all) Return to root mode.
logout
Terminate this telnet session. May be entered from any mode.