Redline RDL-3000 - Table 8: Defaults with no Options Key

RDL-3000 User Manual
70-00158-01-DRAFT Proprietary Redline Communications © 2010 Page 91 of 142 November 25, 2010
The RDL-3000 has the following default settings when operating with no option key:
Table 8: Defaults with No Options Key
System
SNMP
V2
VLAN for Data (Classification)
Disabled
VLAN for Management
Disabled
Wireless
System Mode
PMP SS Only
Channel Width
10 MHz
RF Freq.
T502 radio (MHz): 3300-3800, 3650-3700, 4400-
5000, 4940-4990, 5150-5250, 5495-5600, 5650-
5725, 5725-5795, 5815-5850
Auto Scan
Disabled
Tx Power
10 dBm max.
DFS
Permanently Enabled
Security
AES
Disabled
Secure Management:
HTTPS, SSH, SNMPv3
Disabled
X.509 Authentication
Disabled
Provisioning.
No of Subscribers
0
Max UL/DL UBR
3 Mbps