Redline RDL-3000 - 8.4 FCC & IC Certified Antennas

RDL-3000 User Manual
70-00158-01-DRAFT Proprietary Redline Communications © 2010 Page 140 of 142 November 25, 2010
8.4 FCC & IC Certified Antennas
8.4.1 4.94 - 4.99 GHz Radio: FCC & IC Antennas
This device has been designed to operate with the antennas listed in the following table,
operating with the maximum specified gain settings.
Table 46: Spec. - FCC & IC Antennas: 4.94 - 4.99 GHz PTP Operation
Redline Order #
Application
Gain
Type
Max. Tx Power Setting (dBm)
(dBi)
5 MHz
10 MHz
20 MHz
A9014MTD
PTP
14
90°, 4.9-5.9 GHz,
Panel, Dual Pol.
22
22
22
A6015MTD
PTP
15
60°, 4.9-5.9 GHz,
Panel, Dual Pol.
22
22
22
A2308MFD
PTP
23
8°, 4.9-5.9 GHz,
Panel, Dual Pol.
22
22
22
A2FT2906LTPD
PTP
29
6°, 4.9-5.9 GHz,
Parabolic, Dual Pol.
18
22
22
A3FT3204LTPD
PTP
32
4°, 4.9-5.9 GHz,
Parabolic, Dual Pol.
15
18
22
8.4.2 5.8 GHz Radio: FCC & IC Antennas
This device has been designed to operate with the antennas listed in the following table,
operating with the maximum specified gain settings.
Table 47: Spec. - FCC & IC Certified Antennas: 5.8 GHz PTP Operation
Redline Order #
Application
Gain
Type
Max. Tx Power Setting (dBm)
(dBi)
5 MHz
10 MHz
20 MHz
A9014MTD
PTP
14
90°, 4.9-5.9 GHz,
Panel, Dual Pol.
22
22
22
A6015MTD
PTP
15
60°, 4.9-5.9 GHz,
Panel, Dual Pol.
22
22
22
A2308MFD
PTP
23
8°, 4.9-5.9 GHz,
Panel, Dual Pol.
22 *
22
22
A2FT2906LTPD
PTP
29
6°, 4.9-5.9 GHz,
Parabolic, Dual Pol.
19 *
19
19
A3FT3204LTPD
PTP
32
4°, 4.9-5.9 GHz,
Parabolic, Dual Pol.
16 *
16
16
* 5 MHz channel set to the lowest/highest channel setting is allowed only at reduced power. See Table 48:
Spec. - FCC & IC Certified Antennas: 5.8 GHz PTP Band Edge Operation.