23
Display indications does not
correspond to true value.
Incorrect measure unit was
selected.
Weighing indispensable
conditions were not
observed.
Choose the necessary unit of
weight measure using
switcher.
To get an exact value of
weight it is necessary
to observe a number of
conditions:
1. Place the scales on flat
hard horisontal surface.
2. Get on platform of scales
smoothly.
3. Do not transfer the centre
of gravity from one foot on
another.
4. Avoid sharp movements
and rockings during weighing.
The appliance switches off
automatically.
Automatic switching off
system was activated.
This is normal. The scales
are turned off automatically
upon completion of operation
of the same.
To Next Page
Loading...
