The installation of Holder for charging and storage
(The holder is optional and can be installed according to the actual situation.)
Installation
90 cm
.
The installation of storage holder shall be arranged in a cool and dry place nearby,
and ensure that there is no electrical wiring or piping at the rear of the installation
area.
The recommended distance between the bases of the holder to the ground is above
90cm.
.
Use an power tool to make a hole of 8 mm in diameter and about 30 mm in depth on
the wall. Place the expansion pipes in the hole.
.
Align the screw hole of the storage holder with the hole in the wall, and fix the storage
holder on the wall with the screws.
6
To Next Page
Loading...
