Need help?Do you have a question about the Redroad G10 and is the answer not in the manual?
General| Type | Robot Vacuum Cleaner |
|---|---|
| Suction Power | 2800 Pa |
| Battery Capacity | 5200 mAh |
| Dustbin Capacity | 450 ml |
| Water Tank Capacity | 300 ml |
| Navigation System | LDS Laser Navigation |
| Mopping System | Yes |
| Auto-Empty Dock | Yes |
| Charging Time | 4-5 hours |
| Runtime | 180 minutes |
Details safe usage, child supervision, and environmental precautions for the vacuum-mop.
Guidelines for recharging, warnings, and proper disposal of the battery.
Information on handling the lithium-ion battery to prevent environmental pollution.
Step-by-step guide for safely removing the battery from the vacuum-mop for disposal.
Lists and illustrates components pre-installed on the main vacuum-mop unit.
Lists and illustrates components pre-installed on the self-cleaning station.
Shows additional accessories provided with the vacuum-mop for replacement or use.
Details the various parts, sensors, buttons, and charging components of the vacuum-mop.
Explains the meaning of different indicator light patterns on the vacuum-mop.
Describes the operational functions of the on-off and recharging buttons on the vacuum-mop.
Explains Wi-Fi indicator lights, reset button functions, and system recovery options.
Illustrates and describes the dust compartment, including its release button and filter.
Identifies key components of the self-cleaning station, such as the cleaning brush and drainage hole.
Instructions for positioning the self-cleaning station correctly against a wall with required clearances.
Guidance on removing protective strips from the vacuum-mop before initial use.
Explains the status indicated by different light patterns on the self-cleaning station.
Instructions for initial charging of the vacuum-mop and daily recharging methods.
Details on installing the dust compartment for sweeping mode.
Explains the functions of sweeping/mopping and recharging buttons for various modes.
Guides on attaching the mop, filling the fresh water tank, and installing tanks into the self-cleaning station.
Notes on water type, hot water, carpet handling, and cleaning agents for mopping.
Instructions for powering the device on/off and how the vacuum-mop saves maps.
Details on starting, pausing, resuming cleaning, vibration mopping, and selecting modes.
How the vacuum-mop recharges and cleans its mop, including manual functions.
Guidance on filling fresh water, emptying dirty water, and cleaning components.
Instructions for breakpoint resume, scheduled cleaning, virtual walls, and restricted areas.
Explains different cleaning modes like global, edge, specified-area, and fixed-point cleaning.
How the vacuum-mop identifies carpets, adjusts suction, and handles carpet avoidance.
Details on the automatic sleep function and the non-disturbance mode for quiet operation.
Procedures for resetting Wi-Fi and restoring system settings to factory or previous firmware.
Steps for removing, emptying, and cleaning the dust compartment and its filter.
Guides on cleaning the filter, dust compartment, dirty water tank, and cleaning brush.
Detailed steps for removing, cleaning, and reinstalling the main brush, including hair removal.
Guides on cleaning and maintaining the main brush, side brush, and universal wheel for optimal performance.
Procedures for cleaning the filter pipe, cover, and sponge net within the fresh water tank.
Guidance on cleaning the cliff sensors and edge IR sensors using a soft dry cloth.
Troubleshooting for problems related to scheduled cleaning, offline status, and app connection failures.
Outlines the duration of warranty coverage for the product and its components.
Lists conditions and damages that are not covered under the product's warranty.
Specifies the warranty duration for the vacuum-mop, battery, and self-cleaning station.
Details the principles of warranty service and situations that void the warranty.
To Next Page
