EasyManua.ls Logo

Redroad G10 - Product Maintenance; Brush and Wheel Maintenance; Fresh Water Tank Filter Maintenance

Redroad G10
201 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Universal wheel
1. Turn over the vacuum-mop and pull out the universal wheel upwards.
2. Clean the hair and dirt on the universal wheel.
3. Reinstall the universal wheel.
Filter pipe of fresh water tank
1. Pull out the filter pipe in the fresh water tank.
2. Open the filter cover and clean the filter cover and sponge net.
3. Install the filter pipe back.
Sponge net
Filter pipe
Filter cover
Product Maintenance
Side brush
Cleaning method of main brush
Cut hair Clean up dirt
Note: It is recommended to replace the main brush every 6-12 months to
ensure the cleaning effect.
1. Turn over the vacuum-mop and remove the side brush fixing screw.
2. Remove and clean the side brush.
3. Replace the side brush and lock the screws.
Note: It is recommended to replace the side brush every 3-6 months to
ensure the cleaning effect.

Table of Contents

Other manuals for Redroad G10

Related product manuals