Remove anti-collision protection strip
Before use, be sure to remove the anti-collision protection strips on
both sides of the vacuum-mop.
self-cleaning station is normal
In cleaning
self-cleaning station is abnormal
White light is always on
White light flashes
Yellow light flashes
6
Dirty water tank
Cleaning tray
Fresh water
tank
Cover of cleaning
station
Product Introduction
Sweeping/mopping
button
Recharging cleaning
button
Recharging tray
Cleaning brush
Place the self-cleaning station against the wall and
connect the power cord
Installation
＞0.5m
＞0.5m
＞1.5m
Instructions to the indicator light status of the self-cleaning
station
Notes:
• Do not expose the self-cleaning station to direct sunlight.
• Please ensure a space of at least 0.5m on both the left and right sides of the
self-cleaning station, and a space of at least 1.5m in front of it.
• Pay attention to the power cord, otherwise it may be dragged by the
vacuum-mop, causing the self-cleaning station to move or power off.
• The fresh water tank, dirty water tank, and dirty water filter must be installed in
place.
To Next Page
Loading...
Need help?
General
