Redsbaby JIVE3 - Using the 5-Point Safety Harness

1514
JIVE
3
SECOND SEAT CONVERSION KIT ~ INSTRUCTION MANUAL JIVE
3
SECOND SEAT CONVERSION KIT ~ INSTRUCTION MANUAL
1. Insert the shoulder and waist
strap tabs into the buckle
individually, and click backwards
to secure. You will feel and hear
a firm ‘click’ when each strap
is secured.
2. To unlock the 5-point safety
harness, simply press the button
in the middle of the centre
buckle (C) (Fig.2.4)
3. Adjust the shoulder strap (A1)
and (A2), waist straps (B1) and
(B2) and crotch strap (D) to the
desired fit.
4. Adjust the shoulder height (A1)
and (A2) by accessing the back
of the seat and feeding the
shoulder strap tab from the
back to the front of the seat.
Place the tab at your desired
height and feed the excess tab
into the back of the seat.
Note: The shoulder straps should
sit in the position just above the
shoulders of your child.
Fig 2.4
A1
B1
A2
B2
D
C
Fig 2.5
Using the 5-Point Safety Harness
IMPORTANT:
For the safety of your child the
5-point safety harness must be
properly fitted and adjusted.