EasyManua.ls Logo

Redtiger F9 - Page 18

Redtiger F9
89 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
Trouble Shooting
・RECEIVEDDEADCAMERA?
Use USB cable to connect your camera with computer and
verify that the indicator is blinking.
If not, please Contact Redtiger directly.
・ULTIMATESOLUTION
Use dierent charging ways to verify if the camera work.
1. Unplug all cables from the camera (make sure you can
peorm the following steps to troubleshoot).
2. Plug Type-C USB charger to see if the camera working. If not,
please use your personal USB charge and check again.
3. Check your SD card is U3 Class10, if not, please change to
one that is U3 Class10.
4. Plug SD card and see if the camera working, if not, please
contact Redtiger.
5. If the methods above don't solve your problem, feel free to
contact Redtiger and please leave your contact information
and current address which may be needed if a replacement is
warranted.

Related product manuals