EasyManua.ls Logo

ReelCraft Hose Reel - User Manual

ReelCraft Hose Reel
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Form No: 1146-403
Rev: 10/09
Hose Reel Trailer
Reelcraft Industries, Inc. • (800) 444-3134 / (260) 248-8188 • Fax: (260) 248-2605
reelcraft@reelcraft.com • www.reelcraft.com
Have all installation, operation, maintenance and repair work performed only by a qualified
technician.
1. Do not use the trailer on highways, it is NOT to be used on any public roadway.
2. Do not exceed the 400 pound load limit.
3. The trailer is NOT for riders, NO passengers.
4. Use a towing vehicle prepared and capable of handling the load.
5. Uncontrolled tilting of the trailer can result in personal injury or equipment damage, be cautious when
transversing steep banks, hills, and uneven surfaces.
6. Towing any trailer requires special awareness because of the changed driving situation.
7. When towing, it takes longer to start and stop, use training and practice to avoid accidents.
8. Turning and backing up present new problems, plan ahead.
9. Be sure trailer is fully prepared and connected to towing vehicle.
10. Observe a maximum speed of 10 mph when towing.
11. Use only genuine factory parts as replacements.
12. Periodically check and tighten all parts, bolts, nuts and mounted hardware.
13. Do not overload the trailer. Overloading can result in personal injury or equipment damage.
14. Check and repack wheel bearings once a year.
15. Maintain correct tire pressure according to sidewall data on tire.
16. Check tires for wear every 6 months.
17. Do not allow trailer to tip up without removing the battery.
18. Keep hands and feet away from trailer tongue when lowering to the ground.
19. Refer to the operating manual for the hose reel and for additional safety instructions.
Trailer Safety Precautions
In trailer towing, as in most driving situations, exposure
to certain hazards occurs. Trailer towing is safe when
proper precautions are taken. Read and follow all safety
instructions. In addition, the end user must check and
comply with all federal, state, and local laws before use
Question and Answer IconNeed help?

Do you have a question about the ReelCraft Hose Reel and is the answer not in the manual?

Summary

Trailer Safety Precautions

Exploded View - Trailer Accessories

Exploded View - Trailer

Exploded View - Electrical Accessories

Exploded View - Switch and Bracket

Exploded View - Top Wind Roller Parts

Exploded View - Bottom Wind Roller Parts

Assembly Instructions

Step 1: Unpack and Inspect

Unpack and inspect all components for damage. Note hose pull direction for roller placement.

Step 2: Attach Chain Guard

Attach the chain guard to the reel using 5/16-12 x 3/4” self tapping screws.

Step 3: Attach Switch Box

Attach switch box to reel or mounting bracket using specified hardware.

Step 4: Attach Lower Roller Assembly

Assemble and attach lower roller assembly to reel using 5/16-18 x 3/4” bolts and nuts.

Step 5: Attach Upper Roller Assembly

Assemble and attach upper roller assembly to reel using 5/16-18 x 3/4” bolts and nuts.

Step 6: Attach Axle Brackets and Stabilizers

Step 7: Mount Axle and Wheels

Step 8: Attach Trailer Tongue

Step 9: Mount Hose Reel

Step 10: Attach Battery Box Support

Step 11: Attach Battery Box

Switch Box Mounting

Switch Box Mounting

Details mounting recommendations for the 600811 switch box.

Switch Box Operation

Explains operation of the push button and circuit breaker.

Switch Box Wiring Instructions

Provides wiring diagram and instructions for connecting the switch box to the motor and battery.

Optional Hose Kinking Solution

ReelCraft Hose Reel Specifications

General IconGeneral
BrandReelCraft
ModelHose Reel
CategoryUtility Vehicle
LanguageEnglish