7
6
Once the film cover has been removed lower the lid of the scanning unit, now you may
select between film types you wish to scan, Pressing the Menu tool, then press the right
arrow once to get to the film type selection tool using the down arrow select
from: Positive (slides), Negative (color film strips) or B&W (black & white negatives) Highlight
your selection and press OK.
If you wish to apply the Magic Touch feature for dust & scratches do so now from the menu,
press the OK button and using the right arrow move to the Magic Touch icon
select on to enable dust removal functionality by using the down arrow, once
your selection is highlighted press OK
Scanning Slides
:
NOTE:
Make certain if you had scanned Photograph’s previously that the film scanner cover
inside the unit has been replaced, otherwise you will only see the center portion of your films.
Loading slides into the slide holder, the slides need to be inserted horizontally; backwards
(any writing in the physical image should be backward and upside down)
3720093-多國manual.indd 7 2010/11/4 下午 7:14
To Next Page
Loading...
