Reflections Solar User Manual

LED ILLUMINATED ALUMINIUM CABINETS
Installation Instructions
REFLECTIONS
DESIGNER LED MIRRORS
by LTL
ELECTRICAL SAFETY INSTRUCTIONS
All connections must be installed by a licensed
electrician, in accordance with current building codes.
Consult a qualified electrician.
IMPORTANT
Always switch off the electrical supply at the main
during installation and maintenance. It is
recommended that the circuit breaker is switched off
for the necessary circuit before installation
commences.
Fitting in Bathrooms is subject to the appropriate
building code Regulations. This product is NOT
suitable for outside zones. It is also Not suitable for
installation in saunas, steam rooms or shower
cubicles. This product is only suitable for permanent
installation. DO NOT connect to a trailing plug
and socket outlet. This product is only suitable for
indoor use. Do not attach the product to surfaces that
are damp or otherwise electrically conductive.
INSTALLATION CARE & SAFETY
Wear suitable eye protection when drilling. Take care
when using power tools. Beware of hidden cables or
pipes. Take care if drilling on tiled surfaces in case the
drill slips. A piece of masking tape applied to the wall
before marking out the fixing holes will stop the drill
from wandering.
CLEANING
It is recommended that the unit is cleaned with a soft, dry, non
abrasive cloth when turned off. Never use cleaning agents or
abrasive materials on any type of surface finish. Do not allow
moisture to come into contact with the electrical components.
125 Rt. 61 Schuylkill Haven, PA 17972
1-800-360-1585 • fax 570-385-5475 • info@ltlhomeproducts.com
www.ltlhomeproducts.com
Solar
IMPORTANT
DO NOT strike glass
components with hard or
pointed items. DO NOT
place very hot or very
cold items against or in
close proximity to glass
surfaces unless an
adequately thick
insulation
materal is used to prevent such items coming in
contact with the glass. The nominal thickness of the
mirror glass used in this product is 1/4” and is flm
backed for safety. If the glass becomes chipped or
broken replace immediately.

Reflections Solar Specifications

General

Brand	Reflections
Model	Solar
Category	Furniture
Language	English

Summary

Electrical Safety Instructions

Electrical Safety Precautions

All electrical connections must be made by a licensed electrician. Switch off power before installation.

Installation Guidelines & Restrictions

Follow building codes. Not for saunas or outdoor use. Permanent installation only, no trailing plugs.

Glass Handling and Care

Handle glass components with care. Avoid extreme temperatures near glass surfaces.

Installation Care & Safety

Drilling and Installation Safety

Wear eye protection when drilling. Be cautious with power tools and hidden utilities. Use masking tape.

Cleaning Instructions

Cleaning Recommendations

Clean with a soft, dry, non-abrasive cloth. Avoid moisture contact with electrical parts.

Installation Procedure

Cabinet Preparation and Door Removal

Carefully unpack components. Open doors and remove screws, taking care not to lose them.

Measuring and Door Reattachment

Measure cabinet recess. Release hinges to remove doors, then reattach them securely.

Electrical Connection & Testing

Turn off mains power. Connect the supply cable according to regulations. Restore power and test.

Electrical Connection Details

Mains Supply Connection

Connect the mirror to the mains supply using the provided wire. A second person may be needed.

Colour Coding and Earth Connection

Follow L-Live (Black), N-Neutral (White), Earth (Green) coding. Ensure an earth connection.