24
CAUTION!
CLASS 1 LASER PRODUCT: This CD player is classified as a CLASS 1 LASER
product. Changing controls, settings or performing procedures other than those
described here can lead to dangerous radiation exposure.
UNPACK THE UNIT
1. Carefully remove the device from the box
and remove all packaging material from the
device.
2. Unwind the power cord.
3. Unwind and connect the wire antenna.
4. Place the device on a stable, level surface.
5. Connect the plug to your socket.
6. Open the lid of the turntable. The turntable
is secured with a transport screw for
transport. Use a coin or screwdriver to turn the
transport screw clockwise. This will unlock the
platter.
7. Remove the white plastic cover from the clay
needle by sliding it in the direction of the arrow.
8. Remove the cable tie from the tonearm.
9. Raise the tonearm lock lever.
10. Connect the plug to your 230 V 50 Hz AC socket.
Raise and lower the phono turntable lid.
1. To open the lid, lift it until the lid holder "clicks into place".
2. To close the lid, lift it up slightly and slide the lid holder slightly forward to
unlock the lid. Then carefully lower the lid.
3. To avoid damaging the turntable cover, never open or close the cover by
force and follow the instructions in the operating instructions.
To Next Page
Loading...
