Reflexion LDDX22I+ - Input Sources; Source Selection; Start Channel Scan

EN
54
INPUT SOURCES
1. Press the button to display the input sources.
2. Use the buttons to select the different input sources.
3. Press the button to confirm the selection.
4. The following connections are available.
ATV
Select this menu item if you have connected an analog cable system or
DVB-T antenna to the connection.
DVB-T (T2HD)
Select this menu item if you have connected a digital DVB-T antenna to
the connection.
DVB-C
Select this menu item if you have connected a digital DVB-C cable system
to the connection.
DVB-S (S2)
Select this menu item if you have connected a digital DVB-S antenna to
the connection.
AV
Select this menu item if you have connected an external device (e.g.
video recorder) to the connection. (Mini AV adapter not included).
DVD
Select the menu item to switch to DVD mode for DVD playback.
HDMI 1 (ARC)
Select this menu item if you have connected an external HDMI device
(e.g. Blu Ray player) to the connection.
HDMI 2
Select this menu item if you have connected an external HDMI device
(e.g. Blu Ray player) to the connection.
MEDIA
Select this menu item if you have connected a USB mass storage device
(USB stick / USB hard drive) to the port.
START CHANNEL SCAN
1. Press the button on the remote control.
2. Select the appropriate type of reception and confirm with the button.
 DVB-T
 DVB-C
 DVB-S
3. Now press the button and select Programs.
4. Navigate to Automatic Search and press the button.
5. Select the appropriate settings based on your satellite system, DVB-T antenna or cable
system and click on Search.
6. Press the button to start the search.
7. The search begins. The number of DTV / radio and data stations found during the
search is displayed.