UK
51
want to connect the unit to the Internet at a later time or not at all, you can simply
press the [ ] key to skip the process.
7. Use the following buttons to make the menu settings.
Press the [ ] key to enter the selection.
Use the [ , , , ] keys to navigate in the menu.
LAN connection: Connect the LAN cable from your router to the [RJ45] socket of the
TV set. The network settings are made automatically (connection status: connected,
the IP address is displayed here). Navigate to the menu item [Next] and press the [ ]
key to go to the next menu item.
Wi-Fi connection: Navigate to the WLAN icon to connect the unit wirelessly to the
Internet. The following settings can be made.
WI-FI: In this menu you can switch the W-LAN function on/off.
IP: The IP address is displayed here if the unit is connected to a network.
Wi-Fi list: The Wi-Fi networks found are displayed here.
Set Wi-Fi
1) Select your wireless network from the Wi-Fi list and press the [ ] button.
2) The menu item [Password] is automatically selected.
3) Press the [ ] key to open the keyboard for password entry.
4) Enter your W-LAN password. Use the [ , , , ] keys to select the
letters/numbers/characters. Press the [ ] key to confirm the entry. Once you
have entered the password, navigate to the [►] symbol at the bottom right of the
keyboard and press the [ ] key. Then navigate to the [ ] symbol and press
the [ ] key.
5) After you have successfully entered the password, the unit is connected to the
network.
6) Now press the [ ] key to confirm the network settings and to move to the next
menu item.
8. Country: In this menu item you select the installation location of the unit. "Germany"
is preset as the default country. Press the [ ] key to continue with Germany as the
country. Press the [ ] key to adjust the country. Then use the [ , , , ]
keys to select the desired country. Press the [ ] key to confirm the selection. Press
the [ ] key again to move to the next menu item.
9. Select the Done menu item and press the [ ] key to complete the initial installation.
10. You will now be taken to the Smart TV Home screen.
11. An overlay (tv-launcher-ru-toptech) appears. Confirm by navigating to “Allow” and
pressing the [ ] key.
To Next Page
Loading...
