8
USB MODE
1. Insert a USB stick into the USB socket.
2. The device automatically switches to USB mode.
3. Audio playback starts from the first track.
Operation on the device
Play: [ ].
Pause: [ ]
Next title: [>]
Previous title: [<]
Note:
To switch to USB mode manually, a USB stick must be inserted.
USB sticks up to 64GB are supported.
The USB port is only intended for USB stick playback, other devices
cannot be used with this USB connection.
The USB socket is not to be used for charging external devices.
Do not pull the USB stick out of the device during playback.
BLUETOOTH MODE
1. Press the [ / M] button on the device until Bluetooth is selected.
2. Activate the Bluetooth search on your external device and select the device
OS01BT.
3. If the device is not found, press the [ ] button on the device and an acoustic
signal will sound.
4. Start playback on your external device.
Operation on the device
Play: [ ].
Pause: [ ]
Next title: [>]
Previous title: [<]
Note:
Bluetooth works best within 10 meters outdoors.
The basic volume is specified by your external device. You can use the
volume control on the OS01BT to adjust the volume.
AUX-IN MODE
1. Press the [ / M] button on the device until AUX is selected.
2. Connect the OS01BT and your external device with a 3.5mm jack cable (not
included).
3. The jack cable is connected to the [3.5mm AUX IN] socket of the OS01BT.
4. The basic volume is specified by your external device. You can use the volume
control on the OS01BT to adjust the volume.
5. Control playback with your external device.
To Next Page
Loading...
