Note:
A charging adapter is not included in the scope of delivery.
Wall mounting
The sound bar can also be mounted on a wall if required. Required mounting material, screws and dowels are
not included in the scope of delivery.
1. Transfer the two mounting points to a wall and check with a spirit level that the marks are straight. The
distance between the screws is approx. 59.8 cm. Please be sure to check the distance using the
soundbar mounting points.
2. Check that the screw heads of the screws used for wall mounting fit into the rear mounting points of the
Soundbar.
3. Drill the two holes. Note that depending on the material of the wall, dowels may be needed for the
screws.
4. When tightening the screws, let them protrude approx. 3-4 mm from the wall so that you can hang the
Soundbar on them.
Screws for wall mounting
Notes:
Assembly tools (screwdriver, drill / cordless screwdriver, spirit level) and assembly material (screws
and dowels) are not included in the scope of delivery.
To Next Page
Loading...