Remote Functions
Play, pause, stop, track previous, and track next
The PLAY and PAUSE buttons on the Remote Control are the same
as PLAY/PAUSE on the front panel except they have been
separated.
Stop, track previous, and track next work in the same way as on the
front panel of the player. (See pages 8 & 9.)
Search Back, Search Forward.
Pressing the SEARCH BACK / SEARCH FORWARD buttons in play
mode, plays the disc at high speed, allowing you to find a specific
position in a track.
In pause mode, the track is scanned at a higher speed without
playing music.
To stop the search press the SEARCH BACK / SEARCH FORWARD
button again.
Numeric Keys.
You can start from the beginning of a desired track by pressing the
corresponding NUMERIC KEY. If the track number is greater than 9
press >10 button followed by the number (ie for 15 press >10 then 1
then 5) if the track number is greater than 99 press >100 button
followed by the numbers you require (ie for 105 press >100 then 1
followed by 0 and 5)
Once you have entered the track number press play to start the track.
11
To Next Page
Loading...
Need help?
General
