Rega Neo - Page 2

Setup – Getting Started
Speed Adjustment
Adjusting the Speed
Factory Settings
Measuring the Speed
Warnings
Neo Specications
4
4
5
5
5
6
6
English
Français
Deutsch
Italiano
Español
Português
Nederlands
Dansk
Svenska
Polski
3
7
11
15
19
23
27
31
35
39
The Neo PSU is compatible with the following Rega models:
P3-24 / RP3 / Planar 3 2016 / RP6 / P5 / P7 / RP40 special edition
/ RP8 or any older Rega turntable tted with the aftermarket 24 V
motor upgrade kit.
WARNING: Only use the supplied PS1 AC adaptor.
NEVER connect a power adaptor to the turntable and another to the
Neo simultaneously.
The original power adaptor supplied with your turntable is no longer
required when you connect the Neo.
WARNING: Connecting two power AC adaptors may cause serious
damage.
Connect the turntable using the supplied DIN lead between the rear
of the Neo and the rear of the turntable.
Make sure the PS1 AC adaptor is plugged in and connected to the
24 V AC input socket on the back of the Neo.
3