Need help?Do you have a question about the Rega NEO PSU MK2 and is the answer not in the manual?
General| Compatibility | Rega turntables with 24V motors |
|---|---|
| Mains Voltage | 100-240V AC |
| Frequency | 50/60 Hz |
| Input Voltage | 100-240V AC |
| Type | Power Supply |
| Output Voltage | 24V |
| Speed Control | 33/45 RPM |
Instructions for powering on the Neo and switching between 33½ and 45 rpm.
Correct positioning of the drive belt on the pulley for 33½ rpm operation.
Advice on positioning the Neo to reduce electrical hum pickup.
Lists compatible Rega models and warns against incorrect power adaptor use.
Steps for connecting the turntable to the Neo and the power adaptor.
Details on speed program switch, LED indicator, and adjustment control.
Recommendation to replace old drive belts for accurate speed adjustment.
Procedure to set and confirm turntable speed using the Neo controls.
Instructions to reset the Neo to its original factory speed settings.
Using a stroboscopic disc for accurate turntable speed verification.
Using an iPhone RPM app for speed measurement and adjustment.
Details on power output, consumption, voltage, supply, and speed control.
Instructions on proper connection and use of the power supply unit.
Warnings about exposure to elements, opening the case, and fuse reset.
Information regarding the lifetime warranty, exclusions, and returning goods.
Explanation of the WEEE symbol and proper disposal of electronic equipment.
Instruction for UK customers to return products to the retailer.
To Next Page
