Need help?Do you have a question about the Regal Raptor DAYTONA 125 and is the answer not in the manual?
General| Brand | Regal Raptor |
|---|---|
| Model | DAYTONA 125 |
| Category | Motorcycle |
| Language | English |
Guidelines for safe operation, including pre-ride checks, licensing, visibility, and riding posture.
Recommends wearing a helmet, goggles, boots, and gloves for rider and passenger safety.
Warns against modifications that may render the motorcycle unsafe or illegal, advising prior agreement.
Emphasizes motorcycle sensitivity to weight distribution and improper loading affecting performance.
Discusses special design and testing of company accessories, and user responsibility for non-company accessories.
Details the function of various instruments and indicators on the motorcycle's dashboard.
Explains how to operate the ignition switch, including locking and starting procedures.
Describes the function and location of the horn button on the left handlebar.
Explains how to use the headlight dimmer switch for low and high beam selection.
Details the operation of the turn signal switch for left and right turns.
Explains the function of the passing switch for temporary headlight activation.
Describes how to operate the choke valve handle for cold and warm engine starting.
Provides instructions for using the electric starter button, including precautions.
Explains the different positions and functions of the headlight switch.
Details the function of the engine cut-off switch for stopping or starting the engine.
Provides step-by-step instructions on how to open and close the fuel tank cap.
Lists essential checks before riding, including oil, brakes, tires, throttle, lights, and steering.
Provides warnings and steps for starting the engine safely, avoiding damage and accidents.
Guides through the steps before starting the engine: key insertion, fuel switch, choke, and gear selection.
Details the electric starting process, including button usage and battery precautions.
Explains the procedure for shifting gears, including clutch and gearshift pedal operation.
Details the initial 1000km running-in period, emphasizing speed restrictions and maintenance.
Covers braking techniques, including normal stopping, emergency braking, and cornering safely.
Guides on how to stop the motorcycle safely, including engine shutdown and securing the vehicle.
Details how to check, change engine oil, and clean the oil filter for engine longevity.
Explains the daily procedure for checking the engine oil level using the dipstick.
Provides step-by-step instructions for draining and refilling engine oil and cleaning the oil filter.
Guides on selecting the appropriate spark plug based on riding conditions and temperature.
Details the process for inspecting, cleaning, gapping, and replacing spark plugs.
Explains how to inspect the throttle cable for smooth operation and proper free play.
Details how to check the drive chain for wear and proper tension (10-20mm).
Explains the procedure for adjusting the drive chain tension by loosening and tightening axle nuts.
Guides on cleaning, drying, and lubricating the drive chain for optimal performance and longevity.
Emphasizes checking the brake fluid level in the reservoir and handling precautions due to its corrosive nature.
States the wear limit for the brake disc (3.5mm) and advises replacement when extremely worn.
Outlines daily pre-ride checks for the brake system, including fluid, leaks, tubes, and lever free play.
Instructs on checking the rear brake fluid reservoir level and emphasizes handling precautions.
Specifies the wear limit for the rear brake disc (3.5mm) and advises replacement when worn.
Lists pre-ride checks for the rear brake system: fluid leakage, tubes, disc wear, and lever free play.
Describes the function of coolant, including anti-freezing and preventing overheating.
Provides step-by-step instructions for filling the radiator with coolant.
Explains when and how to replace the coolant, including procedures and cautions.
Describes the function of the coolant temperature sensor and its indication on the alarm lamp.
Details checks for leaks in the water pump and tube, and inspection for circulator damage.
To Next Page
