Regal Century V-GREEN 165 User Manual

Regal Century V-GREEN 165

32 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

165

VARIABLE SPEED USER MANUAL

PremiumEfciencyVariableSpeedMotor

10019878-001-001 _V-Green165 UM_7-30-19.indd 1 8/5/2019 4:26:54 PM

Questions and Answers:

G
grobinsonAug 6, 2025
What to do if my Regal VGreen 165 Engine fails to start?
- S
  sierra05Aug 6, 2025
  If your Regal VGreen 165 Engine fails to start, there are several potential causes. First, check that the DIP switches of SW100 under the controller terminal box cover are in the correct position. Next, verify that mains voltage is present by replacing the fuse or resetting the breaker/GFI. Ensure the mains wire connections are tightened. Also, check the connections at the J201 connector for the user interface. Furthermore, inspect the VGreen 165 shaft to see if it can be rotated by hand and remove any blockage. Finally, the VGreen 165 itself might be damaged and need replacement.
M
Melissa MurphyAug 13, 2025
What to do if Regal VGreen 165 Engine runs, but there is no flow?
- A
  Amber KeithAug 13, 2025
  If your Regal VGreen 165 Engine runs but there's no flow, start by checking if the VGreen 165 is spinning by looking at the fan on the back. If it is spinning, verify that the pump impeller is correctly installed. Also, check for air leaks in the plumbing connections and ensure they are tight. Inspect the strainer and suction side piping for blockages. Finally, check the discharge piping for blockages, including a partially closed valve or a dirty pool filter.
P
perezjacobAug 20, 2025
How to fix a noisy Regal VGreen 165 Engine?
- M
  Miranda BennettAug 21, 2025
  If your Regal VGreen 165 Engine is making excessive noise, the following issues could be the cause: First, check the back of the VGreen 165 to ensure it is free from dirt and debris; use compressed air to clean it. Secondly, inspect the strainer basket for any debris and clean it. Lastly, make sure that the mounting bolts of the VGreen 165 and pump are tight.
J
Jennifer HopkinsAug 28, 2025
Why does my Regal VGreen 165 Engine run and then stop?
- C
  Carolyn RogersAug 28, 2025
  If your Regal VGreen 165 Engine runs and then stops, it could be due to an over-temperature or over-current fault. Check that the back of the VGreen 165 is free from dirt and debris, and use compressed air to clean it. Also, the VGreen 165 will automatically restart after one minute if there is an over-current fault.

Regal Century V-GREEN 165 Specifications

General

Brand	Regal
Model	Century V-GREEN 165
Category	Engine
Language	English

Summary

Safety Information

Hazard Identification Symbols

Explains DANGER, WARNING, CAUTION, NOTICE symbols for hazard identification.

Introduction

Navigation Overview

User Interface Button Descriptions

Details the buttons and LEDs on the VGreen 165 user interface.

VGreen 165 Features

Optional Interface Benefits

Quick Start Instruction

Factory Default Schedule Setup

Guide to initial setup using pre-programmed factory settings.

User-Defined Custom Schedule Setup

Steps to program a custom schedule for duration and speed.

Overview

Wiring

Mains Connection Details

Details pin assignments, wire colors, and torque for mains power.

Communication Connection Details

Details pin assignments and wire colors for communication ports.

Wiring Diagrams

Mains Connection Diagram

Visual representation of mains power connections.

Digital Inputs

Wiring Diagram for Digital Inputs

Illustrates wiring for digital inputs.

Digital Input Connector Overview

Shows the digital input connector layout.

User Interface Operation

LED and Function Overview

Explains the function of each LED and button on the interface.

User Interface Controls

Key Pad Overview

Details the functions of each key on the user interface keypad.

Setting the Schedule

Guide to setting the VGreen 165 operating schedule.

Schedule Management

Factory Default Schedule Table

Lists the default duration and speed settings.

Custom Schedule Tables

Tables to record custom operating schedules.

Running from Keypad

Running VGreen 165 from Keypad

Steps to operate the VGreen 165 using the keypad.

OVERRIDE Feature

OVERRIDE Feature Operation

How to temporarily run the motor at speeds outside the schedule.

Schedule Advance

Schedule Advance Mode

How to set a delayed start for the 24-hour schedule.

Key Lockout

Key Lockout Feature

Feature to prevent accidental changes to settings.

Motor Pause

Motor Pause Feature

Temporarily stops the motor for maintenance without disrupting the schedule.

Temporary Stop

Temporary Stop with Digital/Serial Input

How digital/serial inputs cause a temporary motor stop.

Reset Factory Defaults

Priming

Freeze Protection

Control with Digital Inputs

DIP Switches

Care and Maintenance

FAULT Status

Specifications

Troubleshooting Guide

Related product manuals

Regal Century EVQ225

Regal Century EVQ165

Regal Genteq 6205E

Regal Genteq 6210E

Regal Genteq Evergreen IM

Preview: Regal Genteq Evergreen EM

Regal Genteq Evergreen EM

Preview: Regal genteq Evergreen OM

Regal genteq Evergreen OM