23
The helm station is equipped with the ability to
monitor engine functions through a Garmin chart
plotter. Close observation of the digital display is
recommended throughout the trip as you can split
the screen to accommodate GPS functions along
with monitoring basic engine systems including
fuel usage and hours for maintenance cycles. This
works in addition to the engine manufacturer’s
information panel system.
SELECTED
OPTIONS
SHOWN
Helm Systems
Select models with the dual chart plotter option
another whole dimension of information monitoring
is achievable. Note that with the battery switches
in the “off” position, there is no power to the helm
and the ignition switch will not function.
All electrical features are protected by the main
battery management panel located in the sump.
Refer to earlier pages in this chapter for additional
information. Note to read and understand the
blower operation information on the bottom of
the breaker panel.
Helm Overview- (Typical)
GAS VAPOR
DETECTOR
20 AMP IGNITION
BREAKER
IGNITION
SWITCH
BREAKER PANEL
BLOWER
SWITCH
TRIM TAB
PANEL
REMOTE
CONTROL
SAFETY
LANYARD
ENGINE
INFORMATION
PANEL
TI LT
STEERING
LEVER
AUTOMATIC FIRE
EXTINGUISHER
GAUGE.
GLOVE BOX
STORAGE
GARMIN
CHART PLOTTER
DC FUSE PANEL
BEHIND HELM
To Next Page
Loading...
