Regalo HideAway 5010 HD

Need help?

Do you have a question about the Regalo HideAway 5010 HD and is the answer not in the manual?

Summary

Before Using Product

Before Assembly

Assembling Your Bed Rail

STEP 1

Assemble the left and right sides of the bed rail by inserting support bars securely.

STEP 2

Connect the assembled left and right sides of the bed rail together.

STEP 3

Install the mesh wall by sliding it over the frame and zipping it shut.

STEP 4

Align guide pins with the guide track on the guide arm assembly for both sides.

STEP 5

Slide the frame assembly along the guide track on each side.

STEP 6

Pivot the frame assembly into an upright position, ensuring it locks securely.

Mounting Your Bed Rail to the Bed

STEP 1

Place the bed rail on the box spring and extend straps to the other side for mounting.

STEP 2

Ensure guide arm assemblies are parallel and place the mattress on top.

STEP 3

Tighten the straps by pulling them towards you, securing the bed rail.

STEP 4

Close the locking buckle with a final tug to secure the tightened straps.

Operating the HideAway Feature

STEP 1

Pull up spring locking knobs on hinges to release the frame from its upright position.

STEP 2

Pivot the bed rail mesh wall down parallel to the mattress surface.

STEP 3

Slide the bed rail mesh wall under the mattress until fully hidden.

CARE AND MAINTENANCE

90 DAYS LIMITED WARRANTY

Regalo will replace or repair items failing due to quality/workmanship within 90 days of purchase.