Regalo Safety Gate - User Manual

Please follow these instructions carefully to ensure that
your gate extension is properly installed. Improper
installation could result in the gate becoming dislodged
from the doorway, or unstable. Always make sure the
extension is securely attached to the gate before using. The
safety of your child is your responsibility.
It is preferable to in stall the extension on the hinge side of
the gate. If you have an application that requires additional
extensions,please contact the retailer which you
purchased your gate from. We offer, the following sizes of
extensions for your gate: 4 inch, 6inch, 12 inch and 24
inch. They are available at most retailers that carry our
Regalo Products line of metal gates.
Note:If using this gate at the top of stairs,the 4 Wall Cups
MUST be used . If not use,the gate could be dislodged from
the opening.
Please read these instructions carefully.
Assembly and Installation Instructions
Contact Regalo for questions and replacement
parts. If in doubt concerning the use of your gate,
call our customer care line at 952-435-1080.
Regalo International LLC., 14305 Southcross Drive.
Suite 100, Burnsville, MN 55306.
Made in China.
1. Gate Frame
2. Hardware Pack which should contain:
4 - Threaded Spindle Rods
4 - Adjustable Wheel Spindles
(already assembled to the Spindle Threaded Rods)
Check that you have these contents:
(1)
Important: Keep these
instructions for future
reference
Intended for young children aged six months through 24 months.
Check the gate regularly to see if all the hard ware and mountings
are tightened.
To prevent serious injury or death,securely install gate or
enclosure and use according to manufacturer’s instructions.
Never use with a child able to climb over or dislodge the gate or
enclosure.
Never leave child unattended.
Use only with the locking/latching mechanism securely engaged.
Note:If using this gate at the top of stairs,the 4 wall Cups MUST
beused. If not used,the gate could be dislodged from the opening.
WARNING:
Gate Instructions
4 - Wall Cups
4 - Screws

Summary

Assembly and Installation Instructions

General Safety Warnings

Critical safety precautions for child gate use, including age limits and supervision.

Gate Extension Options

Gate Installation Process

Step 1: Prepare Spindle Rods

Adjusting the spindle rods and adjustment wheels before installation.

Step 2: Insert Spindle Rods into Frame

Sliding the spindle rods into the gate frame tubes without resistance.

Step 3: Position and Attach Wall Cups

Marking and attaching wall cups for secure gate placement, especially at stairs.

Step 4: Initial Gate Placement

Positioning the gate in the doorway and pulling rods until they touch the wall.

Step 5: Final Adjustment

Turning bottom and top adjustment wheels for equal spacing and correct latch gap.

Gate Operation Guide

How to Open the Gate Door

Steps to slide the safety lock, lift the handle, and swing the gate open.

How to Close and Lock the Gate Door

Procedure for closing, pushing the handle, and securing with the safety lock.

Gate Extension and Maintenance

Instructions for Gate Extension

Steps for assembling and fitting gate extensions to the main gate unit.

Removing Your Gate from the Wall

Procedure to detach the gate from the wall by turning adjustment wheels.

Care and Maintenance

Guidelines for checking gate condition, tightening hardware, and cleaning.

Regalo Safety Gate Specifications

General

Material	Steel
Color	White
Extension Available	Yes
Certification	JPMA certified
Mounting Type	Pressure-mounted